RZ 350 ‘86
Race ready
Jim Lomas pipes
2 into 1 intake boot with K&N filter.
Reed spacers
Boyensen reeds.
Ports are cleaned and matched (but not ported)
Squish adjusted
Larger radiator
Crank is pinned and welded
Flywheel lightened and balanced.
Flywheel side crank bearing is TZ350 – roller.
Running premix – U12 and Motul 800T.
Rear shock CBR600 F4i (comp and rebound adjustments).
Front brake calipers are RZ500 (+10% piston dia.)
Preload adjustment fork cap.
Stock 18’’ wheels with Avon AM22 and AM23.
RZ 350 ‘84
Race ready
DG pipes
Individual K&N filter.
Reed spacers
Boyensen reeds.
Ports are cleaned and matched (but not ported)
Squish adjusted
Flywheel lightened and balanced.
Flywheel side crank bearing is TZ350 – roller.
Running premix – U12 and Motul 800T.
Rear shock CBR600 F4i (comp and rebound adjustments).
Suspensions are from ’86 models.
Front brake calipers are ’86 (double pistons)
Preload adjustment fork cap.
Stock 18’’ wheels with Avon AM22 and AM23.
Spares
One assembled spare motor at new 66mm bore.
One freshly rebuild crank pinned and welded.
About spare everything to race both.
Full spare electrics/electronics boxes, ypvs control motor.
Ypvs valve spare sets with seals.
Front sprockets 15, 16, 17. Rear 38, 39, 40, 42, 44.
Bigger carb sets not fitted (32mm)
3 spare sets of wheels (two sets with Avon’s but worn).
’86 fuel tank will need cleaning.
Etc…etc..
$6500 for all
(Spare motor could sell for $1500. Spare crank for $800).
Should be kept for racing!!!
PM me.
Envoyer moi un message.
Fil484
‘84 model
‘86 model
